Here are the G900IDVU1AND2 firmware for Galaxy S5 SM-G900F to those who are running with rooted, any ROMs and custom recovery and cannot get the update officially from Kies or over-the-air OTA. The G900FXXU1ANE2 is an incremental update that may improved system stability and other enhancements. Again, the stock firmware below, are for those who might to return back to official 4.4.2 KitKat update G900FXXU1ANE2. Once you install back an official G900FXXU1ANE2 you will lose root, but you can still root back and install custom recovery anytime you want.
How to Install Back the Official G900FXXU1ANE2 4.4.2 Firmware on Galaxy S5 SM-G900F
Sooner or later if you alter your Galaxy S5 you will end-up and come through this. Once you root or install in custom ROM and then you want to return back your Galaxy S5 to its original firmware, then this is what you need.
Disclaimer: We shall not be held responsible if anything happens to your device by following this guide. You may proceed at your own risk, your phone is not a toy for us, it is your own personal property, it is up to you to decide on what and how to do about it.
Important Note before Installing Galaxy S5 SM-G900F 4.4.2 G900FXXU1ANE2 Firmware
– Make sure that your Galaxy S5′s battery is fully charge.
– Stock ROM packages comes in two formats the ‘Full-Wipe’ (delete your stored data afterflashing) and the ‘Non-Wipe’ (it doesn’t delete your phone’s stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc. before flashing no-matter if it is Full-WIpe or Non-Wipe, just to be safe and ensure that your stored data are in safe if something went wrong during the flashing process.
– Remember or back up the APN settings of your device. ( This only done if you try to install other regions stock ROM.
– Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port. Odin will not work on MAC OS.
– Use the supplied USB cable for your Galaxy S5.
– Enable USB debugging from your phone’s settings. Go to Settings > About device > Look for the build number, and tick that build number for 7-times until a pop-up message says ‘Congratulations you are now a developer’ .
– Do a “Hard Reset” if you have a lot of 3rd party applications installed from your phone, this is useful to gain a smooth flashing. (Just make sure that you already back up all your important files before resetting your device.
– Ensure that KIES is closed and not running in the system tray! Kies will interrupt and doesn’t like Odin, it will block you from flashing.
Download the necessary tools to install the G900FXXU1ANE2 Firmware
Odin Flasher Tools
Odin3_v3.07 download
Odin3_v3.09 download
Galaxy S5 USB Driver download
G900FXXU1ANE2 Firmware Info:
Here are the build info of the 4.4.2 update build version G900FXXU1ANE2 Galaxy S5 G900F:
| Android version: | 4.4.2 (KitKat OS) |
| Baseband version: | G900FXXU1ANE2 |
| Kernel version: | 3.0.4-1315312 |
| Build number: | KOT49H.G900FXXU1ANE2 |
| AP/PDA: | G900FXXU1ANE2 |
| CSC: | G900FOXA1ANE2 |
| Phone: | G900FXXU1ANE2 |
| Build Date: | April 11th 2014 |
Download G900FXXU1ANE2 4.4.2 Firmware
Note!
Choose and install only the right stock ROM on each specified Galaxy S5 model number, DO NOT install to other model numbers for it will harm your device or resulting to possible bricks.
Stock ROM are case sensitive and may result to undesired outcomes if used improperly.. Eachstock ROM was built to a specific product code variant. South America version SM-G900I stock ROM cannot be used on other regions like U.S. Canada, Europe, Asia, Middle East, Africa for it might result into unwanted bricks or other problems such as data connectivity and signal lost.
G900FXXU1ANE2 4.4.2 Firmware Download
| Country/Carrier | PDA | CSC version |
|---|---|---|
| Austria T-Mobile | G900FXXU1ANE2 | G900FTTR1AND1 |
| Bosnia and Herzegovina | G900FXXU1ANE2 | G900FOXX1AND3 |
| Bulgaria | G900FXXU1ANE2 | G900FOXX1AND3 |
| Croatia (TELE2) | G900FXXU1ANE2 | G900FOXX1AND3 |
| Cyprus (Cytamobile Vodafone) | G900FXXU1ANE2 | G900FOXX1AND3 |
| Czech Republic | G900FXXU1ANE2 | G900FETL1AND3 |
| Denmark | G900FXXU1ANE2 | G900FNEE1ANF1 |
| Egypt | G900FXXU1ANE2 | G900FOJV1AND4 |
| Egypt | G900FXXU1ANE2 | G900FOJV1AND4 |
| Estonia | G900FXXU1ANE2 | G900FOXX1AND3 |
| Estonia | G900FXXU1ANE2 | G900FOXX1AND3 |
| Finland | G900FXXU1ANE2 | G900FNEE1ANF1 |
| France | G900FXXU1ANE2 | G900FOXX1AND3 |
| France NRJ | G900FXXU1ANE2 | G900FNRJ1AND2 |
| Germany 1&1 | G900FXXU1ANE2 | G900FXEG1ANE1 |
| Germany T-Mobile | G900FXXU1ANE2 | G900FDTM1AND1 |
| Greece | G900FXXU1ANE2 | G900FOXX1AND3 |
| Hungary | G900FXXU1ANE2 | G900FOXX1AND3 |
| Hungary Telenor | G900FXXU1ANE2 | G900FPAN1ANE1 |
| Iceland | G900FXXU1ANE2 | G900FNEE1ANF1 |
| Ireland | G900FXXU1ANE2 | G900FTSI1AND2 |
| Ireland Meteor | G900FXXU1ANE2 | G900FOXX1AND3 |
| Israel | G900FXXU1ANE2 | G900FOJK1ANF1 |
| Israel Cellcom | G900FXXU1ANE2 | G900FOJK1ANF1 |
| Israel Orange/Partner | G900FXXU1ANE2 | G900FOJK1ANF2 |
| Israel Pelephone | G900FXXU1ANE2 | G900FOJK1ANF2 |
| Italy | G900FXXU1ANE2 | G900FITV1AND2 |
| Italy TIM | G900FXXU1ANE2 | G900FTIM1ANE1 |
| Italy Wind | G900FXXU1ANE2 | G900FWIN1AND2 |
| Kazakhstan | G900FXXU1ANE2 | G900FOXE1ANE2 |
| Latvia | G900FXXU1ANE2 | G900FOXX1AND3 |
| Latvia | G900FXXU1ANE2 | G900FOXX1AND3 |
| Lithuania | G900FXXU1ANE2 | G900FOXX1AND3 |
| Lithuania | G900FXXU1ANE2 | G900FOXX1AND3 |
| Malaysia | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Montenegro | G900FXXU1ANE2 | G900FOXX1AND3 |
| Morocco (MAT) | G900FXXU1ANE2 | G900FOJV1AND4 |
| Morocco (MWD) | G900FXXU1ANE2 | 900FOJV1AND4 |
| New Zealand | G900FXXU1ANE2 | G900FNZC1ANE3 |
| Norway | G900FXXU1ANE2 | G900FNEE1ANF1 |
| Norway (Telenor) | G900FXXU1ANE2 | G900FTEN1AND4 |
| Norway Telenor | G900FXXU1ANE2 | G900FTEN1ANF1 |
| Papua New Guinea | G900FXXU1ANE2 | G900FPNG1ANE3 |
| Philippines | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Philippines (Globe) | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Philippines (Smart) | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Philippines (Sun Cellular) | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Poland | G900FXXU1ANE2 | G900FXEO1AND3 |
| Poland Orange | G900FXXU1ANE2 | G900FIDE1ANE1 |
| Poland Play | G900FXXU1ANE2 | G900FPRT1ANE1 |
| Poland PLUS | G900FXXU1ANE2 | G900FPLS1AND2 |
| Poland T-mobile | G900FXXU1ANE2 | G900FTPL1ANE1 |
| Portugal (TPH) | G900FXXU1ANE2 | G900FOXX1AND3 |
| Romania | G900FXXU1ANE2 | G900FROM1AND2 |
| Romania Cosmote | G900FXXU1ANE2 | G900FCOA1AND1 |
| Romania Orange | G900FXXU1ANE2 | G900FORO1ANE2 |
| Russia | G900FXXU1ANE2 | G900FOXE1ANE2 |
| Saudi Arabia | G900FXXU1ANE2 | 900FOJV1AND4 |
| Saudi Arabia (STC) | G900FXXU1ANE2 | 900FOJV1AND4 |
| Serbia (Telekom) | G900FXXU1ANE2 | G900FOXX1AND3 |
| Serbia (Telenor) | G900FXXU1ANE2 | G900FOXX1AND3 |
| Serbia (VIP) | G900FXXU1ANE2 | G900FOXX1AND3 |
| Singapore | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Singapore (M1) | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Singapore (SingTel) | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Singapore (StarHub) | G900FXXU1ANE2 | G900FOLB1ANE2 |
| Slovakia | G900FXXU1ANE2 | G900FOXX1ANE1 |
| Slovakia | G900FXXU1ANE2 | G900FOXX1AND3 |
| Slovenia | G900FXXU1ANE2 | G900FOXX1AND3 |
| South Africa Vodafone | G900FXXU1ANE2 | G900FOJV1ANE1 |
| South East Europe | G900FXXU1ANE2 | G900FOXX1AND3 |
| Spain | G900FXXU1ANE2 | G900FOXX1AND3 |
| Sri Lanka | G900FXXU1ANE2 | G900FODD1AND2 |
| Sweden | G900FXXU1ANE2 | G900FNEE1ANF1 |
| Sweden Tre | G900FXXU1ANE2 | G900FHTS1ANC6 |
| Thailand | G900FXXU1ANE2 | G900FOXX1AND3 |
| United Arab Emirates | G900FXXU1ANE2 | G900FOJV1AND4 |
| United Kingdom BTU | G900FXXU1ANE2 | G900FOXX1AND3 |
| United Kingdom EE | G900FXXU1ANE2 | G900FEVR1AND1 |
| United Kingdom O2 | G900FXXU1ANE2 | G900FO2U1AND3 |
| United Kingdom Vodafone | G900FXXU1ANE2 | G900FVFG1ANE1 |
| Uzbekistan | G900FXXU1ANE2 | G900FOXE1ANE1 |
| X Download Page | Samsung-Update |  |
List of G900FXXU1ANE2 4.4.2 Kitkat Firmware Update.
Note: Some countries may not included here, it is much better to check via Kies 3.
Unbranded NE2 4.4.2 Stock
Austria – ATO-G900FXXU1ANE2 (link)
Germany – DBT-G900FXXU1ANE2 (link)
Switzerland – AUT-G900FXXU1ANE2 (link)
United Kingdom – BTU-G900FXXU1ANE2 (link)
Italy – ITV-G900FXXU1ANE2 (link)
Nordic Countries – NEE-G900FXXU1ANE2 (link)
Spain – PHE-G900FXXU1ANE2 (link)
Poland – XEO-G900FXXU1ANE2 (link)
South East Europe - SEE-G900FXXU1ANE2 (link)
Carrier Branded NE2 4.4.2 Stock
Austria (T-Mobile) – MAX-G900FXXU1ANE2 (link)
Austria (Telering) – TRG-G900FXXU1ANE2 (link)
Austria (A1) – MOB-G900FXXU1ANE2 (link)
Germany (T-Mobile) – DTM-G900FXXU1ANE2 (link)
Germany (1&1) – XEG-G900FXXU1ANE2 (link)
Germany (Vodafone) – VD2-G900FXXU1ANE2 (link)
Germany (O2) – VIA-G900FXXU1ANE2 (link)
Switzerland (Swisscom) – SWC-G900FXXU1ANE2 (link)
More Countries & Carrier Providers – See here
Extract the downloaded G900FXXU1ANE2 stock firmware
You need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.
Run and Configure Odin
Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.
Reboot your Galaxy S5 into Download Mode
To reboot the Galaxy S5 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the PowerON/OFF button simultaneously.
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Connect your Phone to PC or Laptop
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.
Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.
Load the G900FXXU1ANE2 tar.md5 file
If the stock ROM is pack in One .tar.md5 file only the PDA, CSC and Phone modem are already included to it. Now, you need to just simply click on the PDA button, then browse to the folder where the .tar or .tar.md5 you have previously extracted and then select and load it. ” G900FXXU1ANE2_G900FOXA1ANE2_Home.tar.md5″.
Start Installing G900FXXU1ANE2 stock
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.
Wait until a word PASS!! appears
When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s to remove it from PC or laptop USB connection.
Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.
You can also do factory reset by dialing *2767*3855#.
Check and reconfigure your APN settings when data networks connection issues encountered. This only happens if you installed other regions stock ROM.
Possible errors that you may encountered, this is based on my own experience while flashing stock ROM on Samsung Android devices. These are just a few hints on how to resolved it.
Q: I got an error message that says “Set-up connection Failed” ?
A: Do the following steps:
1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, It isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs.
Try to use another PC or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: You can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Galaxy S5 in Normal mode.
That’s it! you have now learned how to install Samsung Galaxy S5 stock ROM. You can use this procedure again and again, using any future stock ROM that only match with your device.
All other questions and suggestions are most welcome, just let me know by leaving a message on the comment form below. Enjoy!
The post G900FXXU1ANE2 Galaxy S5 SM-G900F 4.4.2 Firmware Update appeared first on GalaxyS5Update.
Aucun commentaire:
Enregistrer un commentaire